Are you Nuts? We are!!!!

Are you Nuts? We are!!!!

Metalmite is known for fast lathe turn-around time! We were able to get this nuts into a lathe and thread them to the gauges in record time. We then had to put them into a mill to generate the complex profile our customer needed. We take pride in these fast turnarounds and getting the customer out of hot water! Our…

Read more

Is your Yoke too much?

Is your Yoke too much?

Metalmite has been known to make yokes from solid in record time and at record low cost. We have 5 and 6 axis equipment that can make these parts in 1 or 2 operations complete! We can even put the splines in using wire EDM or other methods. Our customers agree that the costs have come down substantially since we…

Read more

Turn and Mill

Turn and Mill

Metalmite is known for fast lathe turn-around and speedy milling complex parts! You can see that this part has both turning and milling and is also made from stainless steel. We are not scared away by complexity and intricacy as some shops may be. We look forward to a challenge! We have been told recently that it looks like we…

Read more

Quality Assurance Room takes off!

Quality Assurance Room takes off!

We received our new 5 axis CMM from Hexagon Metrology and we have been doing some incredible inspection since then! Our Inspector Greg R. has gone out for training and learned the new aspects of the new equipment. We have had customer’s come just to have us inspect parts that other suppliers made in order to verify results!… For over…

Read more

CNC Milling for speed!

CNC Milling for speed!

All our CNC mills are Mori Seiki, with he exception of one OKK. We range from 10,000 to 27,000 RPM on the spindles directly, but w go to 45,000 RPM with a geared head. We are known for being a 5 axis machine shop, but we are more than that as well. We believe high speed machining is the wave…

Read more

Aluminum is our friend- Five Axis Milling is too!

Aluminum is our friend- Five Axis Milling is too!

We enjoy machining aluminum whenever we get the chance. It is a welcomed change after machining the alloy and hardened steels we typically get. Whether it is 6061-T6 or 7075-T6 we just let the end mills to the talking and push through as fast as they will allow. I am amazed that we can sometimes look at a job after…

Read more

What is Success?

What is Success?

“Success is doing work that matters for people who care.” -Success Magazine Metalmite has focussed on success for over 45 years while mastering 5 axis machining and CNC grinding. Metalmite offers a full line or five axis machining, 6 axis cnc turning, high speed machining, cnc grinding and Wire EDM. We can cut spline shafts, make plastic prototypes, and much…

Read more