Wire EDM Five Parts at Once

Metalmite loves using our multiple wire EDM’s to run multiple parts at the same time.  We have been able to maximize the savings for our customers by running lights out and setting parts all around the table.
Five Wire EDM parts

In the photo to the right you will see that we are making five parts at the same time. We have run as many as 35 parts when they were small enough. This allows us to keep the machine running even when we are not there.

Metalmite, located in Rochester, Michigan — approximately 20 miles outside of Detroit —  has invested in the best Wire EDM equipment available to benefit their customers. People often ask “What is Wire EDM?” and “How does it cut metal so accurately and percise?” Well, here is how it works; in wire electrical discharge machining (WEDM), or wire-cut EDM, a thin single-strand metal wire, usually brass, is fed through the workpiece, typically occurring submerged in a tank of dielectric fluid.

See our video here


Speak Your Mind